Canon MV930 User Manual

75
E
Editing
Converting Analog Signals into Digital
Signals (Analog-Digital Converter)
By connecting the camcorder to a VCR or 8mm video camcorder, you can convert analog
video/audio signals to digital signals and output the digital signals via the DV terminal.
The DV terminal serves as output terminal only.
Connecting the Devices
Turn off all the devices before starting the connections. Unload the tape from the
camcorder. Refer also to the instruction manual of the connected device. Use the optional
CV-150F (4 pin-4 pin) or CV-250F (4 pin-6 pin) DV Cable.
R
L
Signal flow
DV cable (optional)
Signal flow
STV-250N Stereo Video
Cable (supplied)
Downloaded From VideoCamera-Manual.com Manuals

Canon MV930 Specifications

General

Digital zoom	800 x
Optical zoom	25 x
Interchangeable lens	No
Minimum aperture number	1.8
Sensor type	CCD
Total megapixels	0.8 MP
Optical sensor size	1/6 \
I/O ports	USB IEEE 1394 (Firewire) DV AV
Resolution	640 x 480 pixels
Expansion slots	Memory card
Built-in display	Yes
Display diagonal	2.7 \
Display resolution	112000 pixels
Display aspect ratio	16:9
Camera shutter speed	1/2000 ~ 1/6 s
Battery type	BP-2L5
Battery life (max)	4.30 h
Camcorder type	Handheld camcorder
Minimum illumination	2 lx
Compatible memory cards	SD
Product color	Gray
USB 2.0 ports quantity	1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0

Weight and Dimensions

Depth	92 mm
Width	49 mm
Height	115 mm
Weight	445 g