Canon MV940 User Manual

63
Advanced Functions Playback
E
End Search
When you have played back a tape, you can use this function to locate the end of the last
recorded scene.
In stop mode:
1. Open the FUNC. menu, select ( ) the end search icon and press
().
2. Select ( ) [EXECUTE] and press ( ) to start the search.
• “END SEARCH” appears.
• The camcorder rewinds/fast forwards the tape, plays back the last few seconds of
the recording and stops the tape.
• Operating the joystick ( , ) will cancel the search.
 End search cannot be used once you unload the cassette.
 End search may not work properly if a blank section exists on the tape.
 You cannot use end search to locate the editing end of audio dubbing.
Joystick
FUNC. button
Downloaded From VideoCamera-Manual.com Manuals

Canon MV940 Specifications

General

Recording Format	MiniDV
Viewfinder	Color
Image Stabilization	Electronic
Focus	Auto/Manual
White Balance	Auto/Manual
Microphone	Stereo
Battery	Lithium-ion
LCD Screen Size	2.5 inches
Image Sensor	1/6 inch CCD
Video Resolution	720x576 (PAL)
Exposure Control	Auto/Manual
Interface	IEEE 1394 (FireWire)
Effective Pixels	680, 000