What to do if my Canon MVX300 Camcorder will not turn on?
If your Canon Camcorder will not turn on, the battery pack may be exhausted. Replace or charge the battery pack. Alternatively, the battery pack may not be correctly attached. Attach the battery pack correctly.
How to fix a Canon MVX300 Camcorder that will not focus?
If your Canon Camcorder will not focus, it may be because the autofocus does not work on that subject, so focus manually. Also, the viewfinder may not be adjusted, so adjust it with the dioptric adjustment lever. Finally, the lens may be dirty, so clean the lens.
How to fix a blurred viewfinder picture on a Canon Camcorder?
If the viewfinder picture on your Canon Camcorder is blurred, adjust the viewfinder with the dioptric adjustment lever.
Why does my Canon MVX300 battery pack will not charge?
Your Canon Camcorder battery pack may not charge if the temperature is outside the range of 0 °C and 40°C (32°F and 104°F). In this case, charge the battery pack in temperatures between 0 °C and 40 °C (32°F and 104°F). Also, battery packs become hot with use and may not charge, so wait until the battery pack temperature is below 40 °C (104 °F) and retry charging. Finally, the battery pack may be damaged, so try using a different battery pack.
What to do if my Canon Camcorder switches off by itself?
If your Canon Camcorder switches off by itself, it may be because the battery pack is exhausted, so replace or charge the battery pack. It could also be that the power save function has been activated. In this case, simply turn the camcorder back on.
What to do if pressing the start/stop button will not start recording on Canon Camcorder?
If pressing the start/stop button will not start recording on your Canon Camcorder, ensure the power is on. Also, check if a cassette is loaded. If the tape has reached the end, rewind it or replace the cassette. Another reason could be that the cassette is protected; change the position of the protect switch. Finally, make sure the camcorder is set to CAMERA mode.
How to fix Canon MVX300 Camcorder buttons that will not work?
If the buttons on your Canon Camcorder will not work, first ensure that the camcorder is turned on. If it is on, check if a cassette is loaded, and load one if necessary.
What to do if pressing the playback button does not start playback on Canon Camcorder?
If pressing the playback button does not start playback on your Canon Camcorder, ensure the camcorder is set to PLAY (VCR) mode. Also, check that the TAPE/CARD switch is set to TAPE. Additionally, confirm that a cassette is loaded. If the tape has reached the end, rewind it.
Why does Canon Camcorder cassette compartment will not open?
The cassette compartment on your Canon Camcorder may not open if the battery pack is exhausted, so replace or charge the battery pack. Also, the cassette compartment cover may not be fully open, so open the cassette compartment cover fully.
What does it mean when Canon MVX300 shows “SET THE TIME ZONE, DATE AND TIME”?
If your Canon Camcorder displays “SET THE TIME ZONE, DATE AND TIME”, it means the time zone, date and time are not set, so set them. Alternatively, the backup battery may be exhausted, so replace it and reset the time zone, date and time. Finally, the battery pack may be inserted the wrong way, so insert the backup battery with the + side facing outward and set the time zone, date and time.
To Next Page
General
