Why does Canon MVX300 Camcorder cassette compartment stopped during loading/ unloading?
The cassette compartment on your Canon Camcorder may stop during loading/unloading if the battery pack is exhausted. Replace or charge the battery pack.
How to fix a Canon MVX300 Camcorder that will not focus?
If your Canon Camcorder will not focus, it may be because the autofocus does not work on that subject, so focus manually. Also, the viewfinder may not be adjusted, so adjust it with the dioptric adjustment lever. Finally, the lens may be dirty, so clean the lens.
How to fix a blurred viewfinder picture on a Canon Camcorder?
If the viewfinder picture on your Canon Camcorder is blurred, adjust the viewfinder with the dioptric adjustment lever.
Why does my Canon MVX300 battery pack will not charge?
Your Canon Camcorder battery pack may not charge if the temperature is outside the range of 0 °C and 40°C (32°F and 104°F). In this case, charge the battery pack in temperatures between 0 °C and 40 °C (32°F and 104°F). Also, battery packs become hot with use and may not charge, so wait until the battery pack temperature is below 40 °C (104 °F) and retry charging. Finally, the battery pack may be damaged, so try using a different battery pack.
What to do if my Canon Camcorder switches off by itself?
If your Canon Camcorder switches off by itself, it may be because the battery pack is exhausted, so replace or charge the battery pack. It could also be that the power save function has been activated. In this case, simply turn the camcorder back on.
What to do if pressing the start/stop button will not start recording on Canon Camcorder?
If pressing the start/stop button will not start recording on your Canon Camcorder, ensure the power is on. Also, check if a cassette is loaded. If the tape has reached the end, rewind it or replace the cassette. Another reason could be that the cassette is protected; change the position of the protect switch. Finally, make sure the camcorder is set to CAMERA mode.
How to fix Canon MVX300 Camcorder no sound from the built-in speaker?
If there is no sound from the built-in speaker on your Canon Camcorder, adjust the volume with the SET dial.
How to resolve Canon Camcorder image that will not appear on the TV screen?
If the image from your Canon Camcorder will not appear on the TV screen, ensure that [AV/PHONES ] is set to [AV] in the menu. Additionally, verify that [AV DV] is set to [OFF] in the menu.
What to do if Canon MVX300 Camcorder shows “REMOVE THE CASSETTE”?
If your Canon Camcorder displays “REMOVE THE CASSETTE”, it means the camcorder stopped operating to protect the tape. Unload and reload the cassette.
What does it mean when Canon MVX300 shows “SET THE TIME ZONE, DATE AND TIME”?
If your Canon Camcorder displays “SET THE TIME ZONE, DATE AND TIME”, it means the time zone, date and time are not set, so set them. Alternatively, the backup battery may be exhausted, so replace it and reset the time zone, date and time. Finally, the battery pack may be inserted the wrong way, so insert the backup battery with the + side facing outward and set the time zone, date and time.
To Next Page
General
