Canon MVX300 - Selecting the Audio Output Channel

36
Selecting the Audio Output Channel
You can select the output channels when playing back a tape with audio recorded on two
channels.
1. Press the MENU button to open the menu.
2. Turn the SET dial to select [AUDIO SETUP] and
press the SET dial.
3. Turn the SET dial to select [OUTPUT CH] and press
the SET dial.
4. Turn the SET dial to select a setting option.
• L/R: Stereo: L+R channels, Bilingual: Main+Sub.
• L/L: Stereo: L channel, Bilingual: Main.
• R/R:Stereo: R channel, Bilingual: Sub.
5. Press the MENU button to close the menu.
The setting resets to the L/R setting when you turn the camcorder off.
CAMERA
PLAY (VCR)
CARD CAMERA CARD PLAY
MENU
(37)
AUDIO SETUP OUTPUT CH •••• L/R