Canon MX450 series User Manual

Canon IJ Status Monitor
If you are using the XPS printer driver, replace "Canon IJ Status Monitor" with "Canon IJ XPS Status
Monitor" when reading this information.
The Canon IJ Status Monitor is an application software that shows the status of the printer and the
progress of printing. You will know the status of the printer with graphics, icons, and messages.
Launching the Canon IJ Status Monitor
The Canon IJ Status Monitor launches automatically when print data is sent to the printer. When launched,
the Canon IJ Status Monitor appears as a button on the task bar.
Click the button of the status monitor displayed on the task bar. The Canon IJ Status Monitor appears.
Note
To open the Canon IJ Status Monitor when the machine is not printing, open the printer driver setup
window and click View Printer Status... on the Maintenance tab.
The information displayed on the Canon IJ Status Monitor may differ depending on the country or
region where you are using your machine.
When Errors Occur
The Canon IJ Status Monitor is automatically displayed if an error occurs (e.g., if the printer runs out of
paper or if the ink is low).
In such cases, take the appropriate action as described.

Canon MX450 series Specifications

General

Print Technology	Inkjet
Functions	Print, Copy, Scan, Fax
Print Resolution	Up to 4800 x 1200 dpi
Connectivity	USB, Wi-Fi
Automatic Document Feeder	Yes
Duplex Printing	Manual
Print Speed (Black)	Approx. 9.7 ipm
Print Speed (Color)	Approx. 5.5 ipm
Scan Resolution	1200 x 2400 dpi
Fax Speed	Approx. 3 seconds per page
Scanner Type	Flatbed
Paper Sizes	Letter, Legal
Mobile Printing	Yes
Display	LCD
Dimensions	18.1 x 15.2 x 7.9 inches
Ink Cartridges	PG-240, CL-241