Canon MX450 series User Manual

Loading Envelopes
You can load European DL and US #10 envelopes.
The address is automatically rotated and printed according to the envelope's direction by specifying with the printer driver
properly.
Important
Printing of envelopes from the operation panel is not supported.
Do not use the following envelopes. They could jam in the machine or cause the machine to malfunction.
- Envelopes with an embossed or treated surface
- Envelopes with a double flap
- Envelopes whose gummed flaps are already moistened and adhesive
1.
Prepare envelopes.
Press down on all four corners and edges of the envelopes to flatten them.
If the envelopes are curled, hold the opposite corners and gently twist them in the opposite direction.
If the corner of the envelope flap is folded, flatten it.
Use a pen to press the leading edge in the inserting direction flat and sharpen the crease.
The figures above show a side view of the leading edge of the envelope.
Important
The envelopes may jam in the machine if they are not flat or the edges are not aligned. Make sure that no curl
or puff exceeds 0.1 inches (3 mm).
2.
Load envelopes.
(1) Open the front cover gently, and extend the paper support.
(2) Use the right paper guide (A) to slide both paper guides all the way out.
45

Canon MX450 series Specifications

General

Print Technology	Inkjet
Functions	Print, Copy, Scan, Fax
Print Resolution	Up to 4800 x 1200 dpi
Connectivity	USB, Wi-Fi
Automatic Document Feeder	Yes
Duplex Printing	Manual
Print Speed (Black)	Approx. 9.7 ipm
Print Speed (Color)	Approx. 5.5 ipm
Scan Resolution	1200 x 2400 dpi
Fax Speed	Approx. 3 seconds per page
Scanner Type	Flatbed
Paper Sizes	Letter, Legal
Mobile Printing	Yes
Display	LCD
Dimensions	18.1 x 15.2 x 7.9 inches
Ink Cartridges	PG-240, CL-241