Name: Canon MX450 series
Brand: Canon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Bluetooth settings Screen

• Graphic LCD

• Text LCD

1. Select device name (Graphic LCD)/Device name (Text LCD)

Displays the device name of the printer to which the Bluetooth unit is attached.

Select device name (Graphic LCD)/Device name (Text LCD) Screen

Access refusal setting (Graphic LCD)/Access refusal (Text LCD)

Selecting ON (Graphic LCD)/ON (Text LCD) will disable searching of this printer by a Bluetooth-

compatible device.

Access refusal setting (Graphic LCD)/Access refusal (Text LCD) Screen

Security settings (Graphic LCD)/Security settings (Text LCD)

Select Enable (Graphic LCD)/Enable (Text LCD) and then specify the security mode to activate the

passkey set on the Change passkey (Graphic LCD)/Passkey (Text LCD) screen.

Security settings (Graphic LCD)/Security settings (Text LCD) Screen

Change passkey (Graphic LCD)/Passkey (Text LCD)

You can change the passkey. The passkey refers to an identification number to be determined. It is

used to prevent unwanted access from other Bluetooth devices. The initial value is set to "0000".

Change passkey (Graphic LCD)/Passkey (Text LCD) Screen

Select device name (Graphic LCD)/Device name (Text LCD) Screen

Allows you to set the device name of the printer on a Bluetooth device.

Questions and Answers:

Need help?

Do you have a question about the Canon MX450 series and is the answer not in the manual?

Canon MX450 series Specifications

General