1. File menu
Exit
Exits IJ Network Tool.
2. View menu
Status
Displays the Status screen to confirm the printer connection status and wireless communication status.
Status Screen
Refresh
Updates and displays the contents of Printers: on the Canon IJ Network Tool screen to the latest information.
Important
To change the printer's network settings using IJ Network Tool, it must be connected via a LAN.
If No Driver is displayed for the name, associate the port with the printer.
When the Printer Driver Is Not Associated with a Port
If Not Found is displayed for the status, check the followings:
The access point is turned on.
When using wired LAN, the LAN cable is connected properly.
If the printer on a network is not detected, make sure that the printer is turned on, then select Refresh. It may
take several minutes to detect printers. If the printer is not yet detected, connect the machine and the computer
with a USB cable, then select Refresh.
If the printer is being used from another computer, a screen is displayed informing you of this condition.
Note
This item has the same function as Update in the Canon IJ Network Tool screen.
Network Information
Displays the Network Information screen to confirm the network settings of the printer and the computer.
Network Information Screen
Display Warning Automatically
Enables or disables automatic display of the instruction screen.
When this menu is selected, the instruction screen is displayed if one or more ports are unavailable for printing.
3.
Settings menu
Configuration...
Displays the Configuration screen to configure settings of the selected printer.
Configuration Screen
Note
This item has the same function as Configuration... in the Canon IJ Network Tool screen.
179
To Next Page
Loading...
Need help?
General
