43Troubleshooting
Troubleshooting
This section describes troubleshooting tips for problems you may encounter when using the
machine.
z “An Error Code Is Displayed on the LED” on page 44
z “LED Cannot Be Seen At All” on page 46
z “Cannot Install the MP Drivers” on page 46
z “Cannot Connect to Computer Properly” on page 47
z “Print Results Not Satisfactory” on page 48
z “The Print Result Not Satisfactory When Copying” on page 52
z “Printing Does Not Start” on page 52
z “Paper Does Not Feed Properly” on page 53
z “Paper Jams” on page 54
z “Error Message Appears on the Computer Screen” on page 55
z “Error Message Appears on a PictBridge Compliant Device” on page 57
z “Scanning Problems” on page 58
If an Error Occurs When the Machine Is Connected to a Computer
When an error occurs in printing such as the machine is out of paper or paper is jammed, a
troubleshooting message is displayed automatically. Take the appropriate action described in the
message.
The message may vary depending on the version of your Windows operating system.
Note
This section mainly describes the methods of machine operation for troubleshooting. To handle problems
using your computer, refer to “Troubleshooting” in the User’s Guide on-screen manual. For details on how
to view the on-screen manuals, see “Reading the On-screen Manuals” on page 60.
To Next Page
Loading...
Need help?
General
