4 Before Using the Machine
Turning the Machine On and Off
Turn on the machine before printing.
Turning on the Machine
Before turning on the machine, confirm the following.
z The FINE Cartridges are installed properly.
If you are using the machine connected to a computer, confirm also the following.
z The machine is connected to your computer (or a compatible device).
z The MP Drivers are installed.
1 Press the ON/OFF button to turn on the
machine.
The Power lamp flashes and then remains lit
green.
2 If you are using the machine connected to a
computer, turn on your computer.
Turning off the Machine
1 To turn off the machine, press the ON/OFF
button.
When the Power lamp stops flashing, the machine
is turned off.
Note
If preparatory operations above are not complete, follow your setup sheet to complete them.
Important
If the Alarm lamp begins to flash orange, see “An
Error Code Is Displayed on the LED” on page 44.
Important
About the Power Plug
When removing the power plug after turing off the
machine, be sure to confirm that the Power lamp is
not lit. If the power plug is removed from the wall outlet
with the Power lamp still lit or flashing green, the
machine may become unable to print.
See “Keeping the Best Printing Results” on page 39.
To Next Page
Loading...
Need help?
General
