Canon PowerShot SD1300IS

Setting the Date and Time
The Date/Time settings screen will appear the first time the camera is turned
on. Since the dates and times recorded into your images are based on these
settings, be sure to set them.
1111111111111111111111111111111,"",,",',111,1111111IIIIII1II111111111111
-~
ON/OFF((C~
4 JTurn on the camera.
Press the power button.
The Date/Time screen will appear.
~) Set the date and time.
--J Press the ~ ~ buttons to choose an
option.
Press the
......... buttons to set a value.
J Complete the setting.
Press the @ button.
Once the date and time have been set,
the Date/Time screen will close.
Pressing the power button will turn off the
camera.
@ Reappearing DatelTime screen
Set the correct date and time. If you have not set the date and time, the Date/
Time screen will appear each time you turn
on the camera.
13