114
Changing Camera Settings
You can customize convenient and commonly used functions from the 3
tab (p. 47).
Turning Off the Start-up Image
You can turn off the start-up image that displays when you turn on the
camera.
● Choose [Start-up Image], then press the
qr buttons to choose [Off].
Changing the File Number Assignment
Images you shoot are automatically assigned file numbers in the order they
were taken, from 0001 – 9999, and saved to folders of up to 2,000 images.
You can change the file number assignment.
● Choose [File Numbering], then press the
qr buttons to choose an option.
Continuous
Even if you shoot using a new
memory card, the file numbers
are assigned consecutively
until an image with the number
9999 is taken/saved.
Auto Reset
If you replace the memory card
with a new one, or a new folder
is created, file numbering
begins with 0001 again.
To Next Page
Loading...
