Canon PowerShot SD1300IS

116
Changing Camera Settings
Turning off the Power Saving Function
You can set the power saving function (p. 52) to [Off]. Setting it to [On] is
recommended to save battery power.
● Choose [Power Saving], then press the
m button.
● Press the op buttons to choose [Auto
Power Down], then use the qr buttons to
choose [Off].
● If you set the power saving function to
[Off], be sure to turn the camera off after
use.
Setting the Screen Shut-Off Time
You can adjust the time the screen takes to shut off automatically (p. 52).
This also works when [Auto Power Down] is set to [Off].
● Choose [Power Saving], then press the
m button.
● Press the op buttons to choose [Display
Off], then use the qr buttons to choose a
time.
● In order to save battery power, you should
choose less than [1 min.].