Canon PowerShot SD1300IS

118
Changing Shooting Function Settings
Changing the Image Display Time Right After
Shooting
You can change the length of time the images display after shooting.
● Choose [Review], then press the qr
buttons to choose an option.
Changing the Way the Image Displays Right
After Shooting
You can change the way the image displays after shooting.
● Choose [Review Info], then press the qr
buttons to choose an option.
2 – 10 sec. Displays images for the set time.
Hold
The image displays until you press
the shutter button halfway.
Off No image displays
Off Displays the image only.
Detailed
Displays detailed information
(p. 44).
Focus Check
The area inside the AF frame is
magnified, allowing you to check
the focus. The procedure is the
same as in “Checking the Focus”
(p. 97).