Canon PowerShot SX130 IS

Setting the Display Language
You can change the language that displays on the screen.
Enter Playback mode.
Press the [E] button.
Display the settings screen.
Press and hold the @ button, then
immediately press the
MENU button.
Set the display language.
Press the A T ~ ~ buttons or turn the @
dial to choose a language, then press the
@ button.
Once the display language has been set,
the settings screen will close.
What if the clock appears when the @ button is pressed?
The clock will appear if too much time passes between pressing the @ button
and the
MENU button in Step 2. If the clock appears, press the @ button to
remove the clock and repeat Step
2.
You can also change the display language by pressing the MENU button,
choosing the
tT tab, and choosing the [Language] menu item.
16