3
Nomenclature...................................................................... 4
Installing the Battery .......................................................... 6
Attaching to the Camera .................................................... 6
Turn on the Power Switch.................................................. 7
Fully Automatic Wireless Flash......................................... 8
Flash Ratio with E-TTL II .................................................. 10
Troubleshooting Guide .................................................... 13
Specifications ................................................................... 14
The operation procedures in this instruction manual assume that
both the camera and ST-E2’s power switches are ON.
Icons are used in the text to indicate the respective buttons, dials,
and settings. They match the same icons found on the camera and
ST-E2.
Reference page numbers are indicated by (p.**).
This instruction manual uses the following alert symbols:
: The Caution symbol indicates a warning to prevent shooting
problems.
: The Note symbol gives supplemental information.
Contents
Conventions Used in this Manual
ST-E2_E.fm Page 3 Monday, May 1, 2006 4:09 PM