Canon Wireless LAN Board-B2 User Manual

ENG
Please read this guide before operating this product.
After you finish reading this guide, store it in a safe place for future reference.
Wireless LAN Board-B2
User's Guide

Canon Wireless LAN Board-B2 Specifications

General

Brand	Canon
Model	Wireless LAN Board-B2
Category	Computer Hardware
Language	English

Summary

Before You Start

Confirming the Network

System Requirements

Details the necessary system requirements, including supported access points and authentication servers.

Setting the Primary Network to Wireless LAN

Details the procedure for configuring the machine to use the wireless LAN as the primary network interface.

Checking the Wireless LAN Interface

Using the Wireless LAN Board in a Network

Operations Required to Use the Wireless LAN Board in a Network

Lists the essential operations needed to set up and use the wireless LAN board in a network.

Network Protocol Settings

Configures network protocols like TCP/IP, NetWare, and AppleTalk for wireless communication.

Setting the SSID

Explains how to set the Service Set Identifier (SSID) to connect to a specific access point.

Security Settings

Covers specifying encryption and authentication methods for secure wireless network connections.

Enabling the Settings

Printing a Test Page

Troubleshooting

Troubleshooting for Specifying and Saving Network Settings

Provides solutions for error messages related to specifying and saving network configuration settings.

Network Connection and Printing Troubleshooting

Addresses issues related to establishing network connections and performing printing operations.

Error Messages

Appendix

Network Settings Items

Initializing the Network Settings

Erasing the Security Settings

Updating the Firmware

Provides instructions for updating the firmware of the wireless LAN board using the Remote UI.

Emergency Startup Mode