Canon Wireless LAN Board-B2 - Installing a Certificate Revocation List

Security Settings
2-15
Using the Wireless LAN Board in a Network
2
Installing a Certificate Revocation List
If you selected 802.1X/EAP+WEP or WPA/WPA2+802.1X/EAP as the encryption
and authentication method in "Selecting the Encryption and Authentication
Method," on p. 2-10, follow the procedure below to install a certificate revocation
list, if necessary.
You can only install a certificate revocation list issued by a root CA.
IMPORTANT
The following type of certificate revocation list can be used:
- X.509 version 2 certificate revocation list
- File size 64 KB or less
- DER format (binary format) or PEM format (format with DER format data encoded in
Base64)
NOTE
If the installed certificate revocation list becomes unnecessary, you can erase it by
pressing [802.1X/EAP Settings] ➞ [Erase CRL] ➞ [Erase] on the Extension Card
Settings screen.
1 Click [Settings/Registration] ➞ select [External Interface]
under <Preferences> ➞ click [Extension Card Settings] ➞
[Wireless LAN] ➞ [Wireless LAN Settings] ➞ [802.1X/EAP
Settings].
If the System Manager ID and password have been set, a dialog box prompting
you to enter the System Manager ID and password appears. Enter the System
Manager ID and password ➞ click [OK].