Need help?Do you have a question about the Canton KARAT and is the answer not in the manual?
Floorstanding speakers can become unstable if improperly positioned or rocked.
Switch off the amplifier before connecting speakers to prevent damage.
Terminal allows separate connection for treble/midrange and bass frequencies for bi-wiring or bi-amping.
Optimal positioning is achieved when speakers and listening position form an equilateral triangle.
Use spikes or rubber pucks to decouple speakers from the floor for better isolation.
180 mm aluminum membrane midrange driver with Wave surround.
25 mm aluminum-manganese dome tweeter with Transmission Front Plate.
310 mm aluminum membrane woofer with Wave surround.
Integrated loudspeaker base plate with shock absorbers.
130 mm aluminum membrane midrange driver with Wave surround.
25 mm aluminum-manganese dome tweeter with Transmission Front Plate.
220 mm aluminum membrane woofer with Wave surround.
Integrated loudspeaker base plate with shock absorbers.
High-end floorstanding speaker.
Speaker impedance is 4 to 8 ohms.
Nominal/Music power handling is 350/600 watts.
Frequency response range is 18 to 40,000 Hz.
Features DC-technology, 28mm MDF cabinet, high-end cabling, and bi-wiring/bi-amping connection.
High-end floorstanding speaker.
Speaker impedance is 4 to 8 ohms.
Nominal/Music power handling is 250/380 watts.
Frequency response range is 20 to 40,000 Hz.
Features DC-technology, 16mm MDF cabinet, high-end cabling, and bi-wiring/bi-amping connection.
To Next Page
General
