To Next Page
J
Jacob FieldsJul 26, 2025
What to do if Canton speakers only play low frequencies or only mid/high frequencies?
- OoleeJul 26, 2025
This issue may arise if you're using a loudspeaker with a bi-wiring/bi-amping terminal in single-wiring mode and the cable bridges have been removed. To resolve this, reinstall the bridges between the connector for bass and midrange/tweeter. Alternatively, if operating in bi-wiring mode, ensure the loudspeaker cable is securely connected at both the bass and midrange/tweeter connections. If you're using bi-amping mode, verify that both power amplifiers are operational and correctly connected.
General
