Need help?Do you have a question about the Canton Loudspeakers and is the answer not in the manual?
Guidance on placement: level surface, avoid moisture, heat, and sunlight.
Instructions to avoid opening the housing and use appropriate cleaning agents.
Advice on amplifier output, clipping, and tweeter protection.
Caution regarding center of gravity and potential instability.
Explanation of the 15-20 hour break-in for mechanical parts and sound quality.
Ensures accurate sound by matching speaker and amplifier polarity.
Crucial step to switch off the amplifier before making connections.
Describes separate terminals for treble/midrange and woofer frequencies.
Essential to remove jumpers for bi-wiring/bi-amping to prevent amplifier damage.
Separated crossovers and internal wiring for optimal signal transmission.
Allows fine-tuning sound output via metal bridge adjustments.
Recommendations for wall distance (20cm-1m) and angle (0-5°).
Guidance on setting up an equilateral triangle for best stereo performance.
Use of rubber pucks or metal spikes to isolate speakers from the floor.
Innovative crossover design with DC tech for vibration suppression and precise bass.
Multi-layer wood cabinet design to prevent unwanted resonance.
Details on aluminum-oxyd-ceramic tweeter and Triple Curved Cone midrange.
Canton's commitment to continuous improvement and offering the best sound.
Use of simulation, measuring systems, and anechoic chambers for product development.
Details on woofer, midrange, and tweeter components and materials.
Information on enclosure structure, base, and available finishes.
Key technical specs: impedance, power, SPL, frequency response, crossover frequencies.
Details on woofer, midrange, and tweeter components and materials.
Information on enclosure structure, base, and available finishes.
Key technical specs: impedance, power, SPL, frequency response, crossover frequencies.
Details on woofer, midrange, and tweeter components and materials.
Information on enclosure structure, base, and available finishes.
Key technical specs: impedance, power, SPL, frequency response, crossover frequencies.
Details on woofer, midrange, and tweeter components and materials.
Information on enclosure structure, base, and available finishes.
Key technical specs: impedance, power, SPL, frequency response, crossover frequencies.
Details on woofer, midrange, and tweeter components and materials.
Information on enclosure structure, base, and available finishes.
Key technical specs: impedance, power, SPL, frequency response, crossover frequencies.
Details on woofer and tweeter components and materials.
Information on enclosure structure and available finishes.
Key technical specs: impedance, power, SPL, frequency response, crossover frequencies.
Details on woofer, midrange, and tweeter components and materials.
Information on enclosure, included stand, and available finishes.
Key technical specs: impedance, power, SPL, frequency response, crossover frequencies.
Steps for attaching threaded rods and pipes to the base plate.
Procedure for securing the support plate and affixing rubber pads.
Details on woofer and tweeter components and materials.
Information on enclosure, optional stand, and available finishes.
Key technical specs: impedance, power, SPL, frequency response, crossover frequencies.
Details on woofer and tweeter components and materials.
Information on enclosure design and available finishes.
Key technical specs: impedance, power, SPL, frequency response, crossover frequencies.
Outlines guarantee periods for passive and active loudspeakers.
Instructions to extend warranty from five to ten years via website.
Specifies which Reference models can be registered online.
To Next Page
General
