English
30
Connecting the speakers
You will find the connector terminal on the rear of your Canton
speakers. This terminal is provided for connecting the Canton
speakers to the amplifier.Important!
Make sure that the polarity is correct. Plus to plus and minus to
minus. In order to make it easier to distinguish plus (+) from minus
(–) the screwclamps on the back of the loudspeaker (plus = red,
minus = black) as well as the screwclamps of your amplifier or receiver
differ in color or are marked with a symbol. Also the two conductors
of the loudspeaker cable differ in color, form or marking. Different
polarity between the left and the right channel lead to sound falsifi-
cations.
For a better understanding please check the operating instructions
of your controller.
Important!
Switch-off your amplifier before connecting the speakers to it.
To Next Page
Loading...
