Canton Smart Vento 9 - Technical Data

102
English
Technical data
Smart Vento 9
Power supply
– Operating voltages 100 – 120 V~ or 220–240 V~
– Operating frequency 50/60 Hz
– Power consumption ECO/MAN Standby = 0�5 W
– Power consumption NSB Standby approx� 1�5 W (Factory setting)
– Power consumption AUT Standby approx� 7�2 W
– Power consumption Idle (no Output Signal) approx� 15�2 W
– Max� power consumption approx� 250 W
Dimensions
W: 24�7 cm (28�7 cm with base)
H: 110 cm (with base and device feet)
D: 34 cm (38 cm with base)
Smart Vento 9 and Smart Vento 3
Decoder (only Master)
– DTS Digital Surround
– Dolby Digital
– PCM (32 kHz���96 kHz/8 Bit���24 Bit)
Virtualizer (Only Master)
– DTS TruSurround
Ambient temperature
– Minimum 5 °C (41 °F)
– Maximum 35 °C (95 °F)
Smart Vento 3
Power supply
– Operating voltage 100 – 240 V~
– Operating frequency 50/60 Hz
– Power consumption ECO Standby = 0�35 W
– Power consumption NSB Standby approx� 1�2 W (Factory setting)
– Power consumption AUT Standby approx� 3�4 W
– Power consumption Idle (no Output Signal) approx� 6�6 W
– Max� power consumption approx� 150 W
Dimensions
22 x 40 x 30 cm
Bluetooth
®
(only Master)
– Bluetooth
®
Standard 3�0 (A2DP)
– Supports Qualcomm
®
aptX™ decoding
– Range of up to 10 m
– Frequency range 2400 – 2483,5 MHz (2�4 GHz ISM Band)
– Max� transmitting power 10 mW (+10dBm)
Input level analogue
– Analogue Line = max� 2�0 V (effective)
– Analogue Balanced = max� 2�0 V (effective)