Unpacking Running in
Carefully unpack each carton and check
that all parts listed here are included:
Master Speaker
• 1x master speaker
• 1x fabric cover
• 1x remote control
• 2x mains cable
• 1x optical digital audio cable
• 1x coaxial digital audio cable
• 1x analogue stereo audio cable
• 1x operating instructions
Slave speaker
• 1x slave speaker
• 1x fabric cover
Running in phase until the development of the
maximum sound properties: 15 – 20 operating hours.
• Please listen at normal volume during this time
• Avoid extremely high levels
• Listen to a variety of audio material
Starting up the
remote control
The supplied battery is already
inserted in the remote control�
For activation, remove only the
protective film� Make sure that a
replacement battery is inserted
correctly according to the polarity
markings („+/–“)�
Use only the battery specified
for this system (CR 2032)�
CR 2032
OPEN CLOSE
To Next Page
Loading...