Problem Possible cause Solution
The BT input cannot
be selected via the
“Input” buttons�
The function BTS is activated� The switching happens in this case automatically as soon as the
speaker system detects an audio signal from the end device�
The speaker system
does not automatically
switch to the BT input�
1� The BTS function is deactivated (MAN)� 1� Activate the BTS function (AUT)�
2� Bluetooth
®
is disabled on your end device� 2� Activate Bluetooth
®
on your end device�
3� The speaker system is connected to
another end device�
3� Disable Bluetooth
®
on the other end device�
4� The end device is not paired with
the speaker system�
4� Pair your end device with the speaker system
(see Page 80 resp� 82)�
No playback via
Bluetooth
®
wireless
technology�
1� There is no connection between the speaker
system and the mobile end device�
1� Connect mobile end device as described�
2� The mobile end device is paired,
but it does not play�
2�1� The mobile end device needs to be reconnected�
2�2� Set the volume on the mobile end device to the
maximum possible value�
2�3� Increase the volume of the speaker system�
2�4� Make sure that sources of interference, such as a
WiFi router or a laptop, are not placed in close proximity
to the speaker system�
2�5� Simultaneous operation via WiFi and Bluetooth
®
connection from a mobile end device is not possible
without interference in most cases; therefore, disable
WiFi on the end device�
3� You are out of reach (max� 10 m)� 3� Reduce the distance between the speaker
and the mobile end device�
To Next Page
Loading...