9. Troubleshooting
Some repairs require specialized service knowledge or equipment, as indicated in the
Troubleshooting Chart. In these cases, contact your dealer for repair, adjustment, or part
replacement.
Troubleshooting Chart
If a machine malfunctions or has abnormal operation, stop using the machine immediately.
Using the machine when it is malfunctioning or operating abnormally could injure or kill
the operator or bystanders, or damage the machine.
Use the information in the Troubleshooting Chart to fix the problem. When troubleshooting
procedures involve fuel, oil or other mechanical fluids, or the battery, take all appropriate
safety precautions. Follow all safety precautions for using and inspecting the machine, as
appropriate for a given troubleshooting procedure.
If you can not resolve the problem or do not have the correct tools or knowledge,
take the machine to your dealer or Canycom service center for repair, adjustment, or
part replacement.
Location
Engine
related
Problem Main causes Remedy
Engine does not start or is
difficult to start
Add fuel (See page 12)
Wait for a while before
starting
Add fuel (See page 25)
Clean or replace (See page
29)
Follow procedure in 6.2
"Method of starting" and
try to start again. If the
engine still cannot be
started, please contact your
Canycom distributor
Open the fuel cock (See
page 13)
Add fuel (See page 12)
Return the choke (See
page 14)
Fuel cock not open
No fuel
Failure to return choke
Engine stops immediately
No fuel
Excessive fuel flow
Engine oil is low
Defective ignition of ignition
plug due to contamination or
insufficient sparking
Other
Add fuel (See page 12)
Inspect and add oil (See
page 25)
To Next Page
Loading...
