CanyCom SC45 - User Manual

Questions and Answers

D
Dylan EdwardsSep 4, 2025
Why black smoke comes out of CanyCom SC45 Utility Vehicle exhaust?
- K
  katherine47Sep 4, 2025
  If black smoke is coming out of your CanyCom Utility Vehicle exhaust, the choke lever might be in the closed position; move it to the open position. Also, the air cleaner might be clogged, so clean or replace the air cleaner element. If the problem continues, please contact your CANYCOM representative.
M
Mr. David Little DDSSep 18, 2025
How to solve CanyCom SC45 Utility Vehicle engine not starting (starter does not turn - Electric start model only.)?
- K
  Kimberly PerezSep 18, 2025
  If your CanyCom Utility Vehicle engine isn't starting and the starter isn't turning (electric start model only), ensure the drive clutch is in the [Stop] position and push to turn the main switch to the [Run] position. If the issue persists, the safety switch might be malfunctioning or needs adjustment; in this case, please contact your CANYCOM representative.
J
Jeffrey BrownSep 16, 2025
How to fix CanyCom SC45 that doesn't dump or turn?
- H
  Hannah GarciaSep 16, 2025
  If your CanyCom Utility Vehicle doesn't dump or turn, the hydraulic fluid might be insufficient or deteriorated. Add or change the fluid. Also, check for a loose hydraulics belt and adjust it. If the problem persists, please contact your CANYCOM representative.
K
Kevin EdwardsSep 14, 2025
What to do if CanyCom SC45 machine does not turn smoothly?
- J
  Joseph JohnsonSep 14, 2025
  If your CanyCom Utility Vehicle does not turn smoothly, the side clutch might be improperly adjusted. Adjust the side clutch. If the problem continues, please contact your CANYCOM representative.
A
Allen StevensSep 12, 2025
What to do if CanyCom Utility Vehicle clutch does not disengage positively?
- B
  Brian OliverSep 13, 2025
  If the clutch on your CanyCom Utility Vehicle does not disengage positively, it might be due to an improperly adjusted drive belt. Adjust the drive belt. If the problem persists, please contact your CANYCOM representative.
S
Steven RuizSep 12, 2025
How to fix CanyCom SC45 transmission jumping out of gear?
- W
  Wesley JohnsonSep 12, 2025
  If the transmission on your CanyCom Utility Vehicle jumps out of gear, make sure the transmission is positively in the gear by shifting firmly. Also, excessive load can cause this, so reduce the load. If the problem persists, please contact your CANYCOM representative.
N
Nicole RiosSep 9, 2025
Why CanyCom SC45 Utility Vehicle drive belt slips?
- K
  kathy62Sep 9, 2025
  If the drive belt slips on your CanyCom Utility Vehicle, it might be loose. Adjust the drive belt. If the problem persists, please contact your CANYCOM representative.
M
michelemillerSep 7, 2025
What to do if CanyCom SC45 Utility Vehicle machine does not move when clutch lever is in the [Run] position?
- D
  Duane DavisSep 7, 2025
  If your CanyCom Utility Vehicle doesn't move when the clutch lever is in the [Run] position, ensure the transmission is positively in gear by shifting firmly. Also, check for a loose drive belt and adjust the drive belt if necessary. If the problem persists, follow the instructions in "Driving" to drive, or contact your CANYCOM representative.
S
Samantha BrownSep 5, 2025
Why white or blue smoke comes out of CanyCom Utility Vehicle exhaust?
- B
  Benjamin LynchSep 5, 2025
  If white or blue smoke is coming out of your CanyCom Utility Vehicle exhaust, it might be due to bad fuel, so change the fuel. It could also be the wrong engine oil, so change the oil. If the problem persists, please contact your CANYCOM representative.
S
Susan JohnsonAug 21, 2025
What to do if CanyCom SC45 Utility Vehicle track does not move smoothly?
- D
  Denise NortonAug 21, 2025
  If your CanyCom Utility Vehicle track does not move smoothly, the track might be improperly adjusted. Adjust the track. If the problem persists, please contact your CANYCOM representative.