-23-
Operation 4
• Always stop machine to shift gears.
• Always shift gears rmly. When transmission is not rmly shifted, it may jump
out of gear, resulting in loss of control of machine.
Shifting
1. Stop machine.
2. Move shift lever or auxiliary (aux.) shift lever
rmly into a desired position.
• Refer to "Product Specications" (Page 11)
for speed in each gear.
• When it is difcult to shift gears, move drive
clutch lever toward [Run] position slightly
and try again. It may help shifting smoothly.
NOTE
3577M-6107-0402-110
Shift Lever
N
Aux. Shift Lever
1/43/6
R1/R2
2/5
High
Low
To Next Page
Loading...
