To Next PageTo Next PageWhy CanyCom Utility Vehicle engine overheats?
If your CanyCom Utility Vehicle engine overheats, it might be due to an insufficient amount of engine oil. In this case, fill oil. If the problem persists, please contact your CANYCOM representative.
What to do if CanyCom Utility Vehicle brake does not work well?
If the brake on your CanyCom Utility Vehicle isn't working well, it might be due to an improperly adjusted brake, so adjust the brake. If the brake is wet with water, apply it a few times to dry it. Also, excessive load can affect braking, so reduce the load. If the problem persists, please contact your CANYCOM representative.
How to fix irregular idling on CanyCom Utility Vehicle?
If your CanyCom Utility Vehicle is idling irregularly, the air cleaner element might be clogged. Clean or replace it. If the problem continues, please contact your CANYCOM representative.
What to do if CanyCom SC45 engine stops abruptly?
If your CanyCom Utility Vehicle engine stops abruptly, first check the fuel level and fill fuel if needed. If the issue persists, please contact your CANYCOM representative.
Why CanyCom SC45 Utility Vehicle has poor power or acceleration?
If your CanyCom Utility Vehicle is showing poor power or acceleration, the cause might be bad fuel, so change the fuel. Check for a clogged air cleaner, and clean or replace the air cleaner element if necessary. A loose drive belt can also cause this issue, so adjust the drive belt. Moreover, reduce the load if it is excessive. If the problem persists, please contact your CANYCOM representative.
What to do if CanyCom SC45 engine stalls?
If your CanyCom Utility Vehicle engine stalls, it might be because the engine is cold; in this case, warm up the engine. Another possible reason is that the choke lever is in the closed position. If so, move the choke lever to the open position. If the issue continues, please contact your CANYCOM representative.
Why CanyCom Utility Vehicle engine does not start?
If your CanyCom Utility Vehicle's engine isn't starting, several factors could be at play. You might be out of fuel, so check and fill the fuel tank if needed. The engine could be flooded with too much fuel; in this case, wait a bit before attempting to restart. Ensure the fuel valve lever is open to allow fuel flow. A faulty spark plug could also be the culprit, so inspect, clean, or replace it. If none of these resolve the issue, consult the "Starting" instructions for further guidance. If the problem continues, contact your CANYCOM representative.
Shows and explains the safety labels attached to the machine.
Provides essential safety precautions for operating and maintaining the machine.
Outlines essential training requirements for operators using the machine.
Details the names and functions of various controls on the machine.
Lists detailed technical specifications for the SC45 model.
Steps to take before starting machine operation.
Instructions on how to check and fill the fuel tank safely.
Outlines the scheduled maintenance tasks and intervals for the machine.
Covers maintenance procedures specifically for the engine.
Provides guidance on identifying and resolving common machine malfunctions.
Instructions and safety precautions for hauling the machine.
Details the correct procedures for loading and unloading the machine.
General| Brand | CanyCom |
|---|---|
| Model | SC45 |
| Category | Utility Vehicle |
| Language | English |
