Instruction manual BXi911 13
Please keep this instruction manual for future reference
» The electrical connection must correspond to the electrical requirement noted on the rating
plate, which is placed inside the cooker hood. The appliance should now be connected to the
electrical supply.
» Check that the appliance is operating correctly by selecting each speed and switching the light
bulbs on and off.
» Remove the hanging hook and then slide the lower chimney section downwards, until it rests
against the main body of the cooker hood.
» Use a stainless steel cleaner and polish on the stainless steel sections of the appliance.
» If you are using the appliance in recirculation mode, then you should now fit the charcoal filter.
See the “fitting the charcoal filter” section on page 14.
» Fix the one-way-valve to the air outlet of the cooker hood. Then, attach the exhaust pipe onto
the one-way-valve as shown below.
8
To Next Page
Loading...
