22
Replacing the lamp in the oven
- Cut off the supply of power to the oven by turning off the omni-polar switch
connecting it to the mains, or by removing the plug if it is accessible.
- Unscrew the glass cover attached to the lamp holder.
- Unscrew the lamp and replace it with another high-temperature lamp (300˚C) with
the following characteristics:
Voltage: AC220V-240V
Wattage: 15W
Socket: E14
T300
ć
A
- Remount the glass cover and reconnect the appliance to the power supply.
WARNING:
Ensure the appliance is unplugged before replacing the lamp to avoid the possibility
of an electric shock.
To Next Page
Loading...
