Caple C2239 - Page 21

Instruction manual C2239
Please keep this instruction manual for future reference
21
How to use the clock function
- When a function has been selected, the corresponding function indicator flashes
for approx. 5 seconds. During this time the desired times can be set using the
/
control knob.
- When the desired time has been set, the function indicator flashes for approx.
another 5 seconds. After that the function indicator is then lit. The set time begins
to run.
- Press any of the buttons to stop the acoustic signal.
- The desired oven function and temperature can be selected before or after the
clock functions of cook time
CONTROL PANEL
1. Function control knob
2. Temperature control knob (+/-)
3. Light
4. Timer
5. Boost
6. Display screen
B
OOST
Press the Boost button once a function and temperature have been
selected to activate the rapid preheat boost function. When the oven
reaches the set temperature, the boost function will automatically
turn off. The Boost function is only availabe with the following 3
functions:
P
YROLYTIC CLEANING
When the Pyrolytic cleaning function is selected, the door will lock,
and the oven will reach extremely high temperatures to clean the
inside of the oven.
En
sure all the shelves, trays and side racks are removed before
s
electing this function.
No
te: All functions will start automatically 5 seconds after being
selected.
WAR
NING: When selecting a function, ensure the function control
knob is placed directly in line with the required function, and not
unbetween two functions.
and end time
CONTROL PANEL
1. Function control knob
2. Temperature control knob (+/-)
3. Light
4. Timer
5. Boost
6. Display screen
B
OOST
Press the Boost button once a function and temperature have been
selected to activate the rapid preheat boost function. When the oven
reaches the set temperature, the boost function will automatically
turn off. The Boost function is only availabe with the following 3
functions:
P
YROLYTIC CLEANING
When the Pyrolytic cleaning function is selected, the door will lock,
and the oven will reach extremely high temperatures to clean the
inside of the oven.
En
sure all the shelves, trays and side racks are removed before
s
electing this function.
No
te: All functions will start automatically 5 seconds after being
selected.
WAR
NING: When selecting a function, ensure the function control
knob is placed directly in line with the required function, and not
unbetween two functions.
are set.
- When the cooking time has ended, turn the oven function and temperature dial
back to the OFF position.
Countdown
CONTROL PANEL
1. Function control knob
2. Temperature control knob (+/-)
3. Light
4. Timer
5. Boost
6. Display screen
B
OOST
Press the Boost button once a function and temperature have been
selected to activate the rapid preheat boost function. When the oven
reaches the set temperature, the boost function will automatically
turn off. The Boost function is only availabe with the following 3
functions:
PYROLYTIC CLEANING
When the Pyrolytic cleaning function is selected, the door will lock,
and the oven will reach extremely high temperatures to clean the
inside of the oven.
En
sure all the shelves, trays and side racks are removed before
selecting this function.
Note: All functions will start automatically 5 seconds after being
selected.
WARNING: When selecting a function, ensure the function control
knob is placed directly in line with the required function, and not
unbetween two functions.
- Press
button repeatedly, until the countdown indicator
CONTROL PANEL
1. Function control knob
2. Temperature control knob (+/-)
3. Light
4. Timer
5. Boost
6. Display screen
B
OOST
Press the Boost button once a function and temperature have been
selected to activate the rapid preheat boost function. When the oven
reaches the set temperature, the boost function will automatically
turn off. The Boost function is only availabe with the following 3
functions:
P
YROLYTIC CLEANING
When the Pyrolytic cleaning function is selected, the door will lock,
and the oven will reach extremely high temperatures to clean the
inside of the oven.
En
sure all the shelves, trays and side racks are removed before
s
electing this function.
No
te: All functions will start automatically 5 seconds after being
selected.
WAR
NING: When selecting a function, ensure the function control
knob is placed directly in line with the required function, and not
unbetween two functions.
flashes.
- Using the
/ control knob, set the required countdown (max. 2 hours
30 minutes).
- After approx. 5 seconds, the display shows the remaining time.
- The countdown indicator
CONTROL PANEL
1. Function control knob
2. Temperature control knob (+/-)
3. Light
4. Timer
5. Boost
6. Display screen
B
OOST
Press the Boost button once a function and temperature have been
selected to activate the rapid preheat boost function. When the oven
reaches the set temperature, the boost function will automatically
turn off. The Boost function is only availabe with the following 3
functions:
P
YROLYTIC CLEANING
When the Pyrolytic cleaning function is selected, the door will lock,
and the oven will reach extremely high temperatures to clean the
inside of the oven.
En
sure all the shelves, trays and side racks are removed before
s
electing this function.
No
te: All functions will start automatically 5 seconds after being
selected.
WAR
NING: When selecting a function, ensure the function control
knob is placed directly in line with the required function, and not
unbetween two functions.
will light up.
- When the time has elapsed, the function indicator flashes and an acoustic signal
sounds for 2 minutes. Press any button to switch off the signal.
Cook time
CONTROL PANEL
1. Function control knob
2. Temperature control knob (+/-)
3. Light
4. Timer
5. Boost
6. Display screen
B
OOST
Press the Boost button once a function and temperature have been
selected to activate the rapid preheat boost function. When the oven
reaches the set temperature, the boost function will automatically
turn off. The Boost function is only availabe with the following 3
functions:
P
YROLYTIC CLEANING
When the Pyrolytic cleaning function is selected, the door will lock,
and the oven will reach extremely high temperatures to clean the
inside of the oven.
En
sure all the shelves, trays and side racks are removed before
s
electing this function.
No
te: All functions will start automatically 5 seconds after being
selected.
WAR
NING: When selecting a function, ensure the function control
knob is placed directly in line with the required function, and not
unbetween two functions.
- Press selection button
repeatedly, until the cook time indicator
CONTROL PANEL
1. Function control knob
2. Temperature control knob (+/-)
3. Light
4. Timer
5. Boost
6. Display screen
B
OOST
Press the Boost button once a function and temperature have been
selected to activate the rapid preheat boost function. When the oven
reaches the set temperature, the boost function will automatically
turn off. The Boost function is only availabe with the following 3
functions:
P
YROLYTIC CLEANING
When the Pyrolytic cleaning function is selected, the door will lock,
and the oven will reach extremely high temperatures to clean the
inside of the oven.
En
sure all the shelves, trays and side racks are removed before
s
electing this function.
No
te: All functions will start automatically 5 seconds after being
selected.
WAR
NING: When selecting a function, ensure the function control
knob is placed directly in line with the required function, and not
unbetween two functions.
flashes.
- Using the
/ control knob, set the required cooking time.
- After approx. 5 seconds, the display returns to the current time. The cook time
indicator
CONTROL PANEL
1. Function control knob
2. Temperature control knob (+/-)
3. Light
4. Timer
5. Boost
6. Display screen
B
OOST
Press the Boost button once a function and temperature have been
selected to activate the rapid preheat boost function. When the oven
reaches the set temperature, the boost function will automatically
turn off. The Boost function is only availabe with the following 3
functions:
P
YROLYTIC CLEANING
When the Pyrolytic cleaning function is selected, the door will lock,
and the oven will reach extremely high temperatures to clean the
inside of the oven.
En
sure all the shelves, trays and side racks are removed before
s
electing this function.
No
te: All functions will start automatically 5 seconds after being
selected.
WAR
NING: When selecting a function, ensure the function control
knob is placed directly in line with the required function, and not
unbetween two functions.
will flash and AUTO symbol will appear in the display.
- When the time has elapsed, the cook time indicator will flash, an acoustic signal
will sound for 2 minutes and the oven will switch itself off. Press any button to
switch the signal and the programme off.