Caple C2239 - Pyrolytic Cleaning

Instruction manual C2239
Please keep this instruction manual for future reference
23
Please keep this instruction manual for future reference
PYROLYTIC CLEANING
With the Pyro clean mode, the internal temperature of the oven reaches 500ºC. The
pyrolytic cycle is activated, burning away food and grime residues. Dirt is literally
incinerated. Keep children away from the appliance during the automatic cleaning
cycle as surfaces may become very hot. Particles may ignite inside the oven due to
the combustion process. There is no cause for concern: this process is both normal
and hazard-free.
Before initiating the Pyro clean mode:
- Remove large or coarse food residues from the inside of the oven using a damp
sponge. Do not use detergents.
- Remove all accessories.
- Remove the side racks, telescopic runners, trays and wire shelves.
- Do not place tea towels or pot holders over the oven handle.
- Ensure any tin foil is removed from the oven cavity.
NOTE:
If the oven is too hot, the pyrolytic may not start. Wait for the oven to cool down.
SAFETY DEVICES
- The icon on the display, when lit, indicates that the oven door was
automatically locked as soon as the temperature reached a high value.
- If a malfunction occurs, the heating elements will be switched off.
- Once the oven door has been locked, you cannot change the duration and cycle
end time settings.
End of c e
re set.
End of c e
19
℃。
is
process is
free.
u
i for the oven to
see previous instrucon for info on how to
set this.
con on the t
h w
c
PYROLYTIC CLEANING
19
℃。
is
process is
free.
u
i for the oven to
see previous instrucon for info on how to
set this.
con on the t
h w
c
PYROLYTIC CLEANING
Pyrolytic Cleaning
With the Pyro clean mode, the internal temperature of the oven reaches 475ºC. The
pyrolytic cycle is activated, burning away food and grime residues. Dirt is literally
incinerated. Keep children away from the appliance during the automatic cleaning
cycle as surfaces may become very hot. Particles may ignite inside the oven due to
the combustion process. There is no cause for concern: this process is both normal
and hazard-free.
Before initiating the Pyro clean mode:
- Remove large or coarse food residues from the inside of the oven using a damp
sponge. Do not use detergents.
- Remove all accessories.
- Remove the side racks, telescopic runners, trays and wire shelves.
- Do not place tea towels or pot holders over the oven handle.
- Ensure any tin foil is removed from the oven cavity.
NOTE:
If the oven is too hot, the pyrolytic may not start. Wait for the oven to cool down.
Safety Devices
- The icon
Please keep this instruction manual for future reference
PYROLYTIC CLEANING
With the Pyro clean mode, the internal temperature of the oven reaches 500ºC. The
pyrolytic cycle is activated, burning away food and grime residues. Dirt is literally
incinerated. Keep children away from the appliance during the automatic cleaning
cycle as surfaces may become very hot. Particles may ignite inside the oven due to
the combustion process. There is no cause for concern: this process is both normal
and hazard-free.
Before initiating the Pyro clean mode:
- Remove large or coarse food residues from the inside of the oven using a damp
sponge. Do not use detergents.
- Remove all accessories.
- Remove the side racks, telescopic runners, trays and wire shelves.
- Do not place tea towels or pot holders over the oven handle.
- Ensure any tin foil is removed from the oven cavity.
NOTE:
If the oven is too hot, the pyrolytic may not start. Wait for the oven to cool down.
SAFETY DEVICES
- The icon on the display, when lit, indicates that the oven door was
automatically locked as soon as the temperature reached a high value.
- If a malfunction occurs, the heating elements will be switched off.
- Once the oven door has been locked, you cannot change the duration and cycle
end time settings.
End of c e
re set.
End of c e
19
℃。
is
process is
free.
u
i for the oven to
see previous instrucon for info on how to
set this.
con on the t
h w
c
PYROLYTIC CLEANING
19
℃。
is
process is
free.
u
i for the oven to
see previous instrucon for info on how to
set this.
con on the t
h w
c
PYROLYTIC CLEANING
on the display, when lit, indicates that the oven door was
automatically locked as soon as the temperature reached a high value.
- If a malfunction occurs, the heating elements will be switched off.
- Once the oven door has been locked, you cannot change the duration and cycle
end time settings.
Once the Pyrolytic cleaning cycle is over
You will have to wait until the temperature inside the oven has cooled down
sufficiently before you can open the oven door. You will notice some white dust
deposits on the bottom and the sides of your oven; remove these deposits with a
damp sponge once the oven has cooled down completely alternatively, you can
make use of the already heated oven, in which case it is not necessary to remove
the deposits, they are completely harmless and will not affect your food in any way.