Instruction manual C858i
20
Please keep this instruction manual for future reference
Set the time by touching the slider control. (e.g. 6)
Touch the timer control again, the ‘1’ will flash.
Set the time by touching the slider control (e.g. 9), now the timer is set at
96 minutes.
When the time is set, it will begin to count down immediately. The display
will show the remaining time and the timer indicator will flash for 5
seconds.
When the timer expires, the corresponding cooking zone will switch off
automatically.
- Other cooking zones will keep operating if they are turned on previously.
- The red dot next to the power level indicator will illuminate indicating that the zone is selected
and a timer is set.
SET MULTIPLE ZONES
When you set the time for several cooking zones simultaneously, decimal
dots of the relevant cooking zones are on. The minute display shows the
min. timer, and the dot of the corresponding zone flashes.
Once the countdown timer expires, the corresponding zone will switch off.
Then it will show the new min. timer and the dot of corresponding zone will
flash.
Touch the heating zone selection control, the corresponding timer will be shown in the timer indicator.
set to 15 minutes
set to 45 minutes
To Next Page
Loading...
