20 Instruction manual C873G, C866G & C848G Please keep this instruction manual for future reference
ELECTRICAL CONNECTION
The appliance must be connected to the electrical mains by qualified personnel and in conformity
with statutory legislation.
The voltage of the electric supply must correspond to the value indicated on the label affixed to
the underside of the appliance.
Make sure that the electric system has an efficient earth connection in compliance with regulations
and legislation. This appliance must be earthed.
IMPORTANT:
If the household electrical system does not meet specifications or does not have an efficient earth
connection, the appliance will not operate.
If the appliance is not fitted with a plug, connect a standard plug to the power cable.
If the appliance is to be wired directly to the mains supply, a disconnect device must be interposed
having a sufficient contact gap to allow complete isolation also in category III surge conditions, in
accordance with installation regulations.
In case of a power failure, the appliance will not operate and the burners cannot be lit using
matches or external igniter.
However, the appliance can continue to operate correctly if the power cord is connected to an
uninterrupted power supply. In this case, operation is normal.
To Next Page
Loading...
