Caple CAFF42 - Page 8

8 Instruction manual CAFF42 Please keep this instruction manual for future reference
- Clearance of at least 100mm is required at the top of
your appliance. Do not place anything on top of
your appliance.
- Caple is not responsible for any damage that may
be caused by defective placement and installation by
unauthorised persons.
- When unpacking the appliance, make sure that it is not
damaged during transportation.
- Check the appliance for any damage.
- In the case of any defect; do not use the appliance and
contact your retailer or Caple Service immediately.
-
WARNING Serious injury or death risk
RISK OF ELECTRIC SHOCK Dangerous voltage risk
FIRE Warning; Risk of re / ammable materials
CAUTION Injury or property damage risk
IMPORTANT Operating the system correctly
WARNING: When positioning the appliance, ensure
the supply cord is not trapped or damaged. If the supply
cord is damaged, it must be replaced by a Caple service
technician or similarly qualified persons in order to
prevent a hazard.
- Never touch the power cord/plug with wet hands. This
may cause a short circuit or electric shock.
-
WARNING Serious injury or death risk
RISK OF ELECTRIC SHOCK Dangerous voltage risk
FIRE Warning; Risk of re / ammable materials
CAUTION Injury or property damage risk
IMPORTANT Operating the system correctly
WARNING: The plug must be accessible after
installation. Do not locate multiple portable socket-outlets
or portable power supplies at the rear of the appliance.
- Protect your appliance against atmospheric effects. Do
not expose it to effects such as sun, rain, snow etc.