Caple CCH601SS - Page 14

Instruction manual CCH14
Please keep this instruction manual for future reference
INSTALLATION – RECIRCULATION MODE
If you do not have an outlet to the outside, the exhaust
pipe is not required (as shown in the section “Installation -
ducted”), and charcoal filters must be installed.
INSTALLING THE CHARCOAL FILTER (CAP60CF)
An activated charcoal filter can be used to trap odours. In order to install the charcoal filter, the
grease filter should be detached first. Press the release button and pull it downward as shown
below.
Fit the activated charcoal filter onto the side of the motor and turn it in a clockwise direction to
lock into place. Repeat the same on the other side.
Scan the QR Code to access the ‘How To’ video.
8
 

, and
charcoal filters must be installed.
9
 (CAP61CF)






 

 

 We recommend replacing these filters every 6 months. Replacement
filters (CAP61CF) can be purchased directly from www.caple.co.uk