Caple CM465SS - Carrying out the Descaling

Instruction manual CM465 / CM465SS / CM465GM26 Please keep this instruction manual for future reference
1. Insert the hot water nozzle.
2. Press the touch key ‘MENU’ and press the scroll touch keys until the
menu option “DESCALE” appears. Confirm the menu option with the
touch key ‘OK’.
3. The display shows ”PLEASE CONFIRM”. Confirm with the touch key
‘OK’. The descaling programme starts.
The top line of the display alternates between “ADD DESCALER” and
“PLEASE CONFIRM”.
4. Empty the tank of water, pour the contents of the descaler pack into
the tank respecting the instructions given on the descaler pack, then
add water. For subsequent descaling operations, descaling solutions
can be purchased from www.caple.co.uk.
Make sure that any splashes from the descaling product do not
come into contact with surfaces that are sensitive to acids, such
as marble, limestone and ceramic.
5. Put a container with a capacity of at least 2 litres underneath the hot
water nozzle.
6. Press the touch key ‘OK’ (9). The display shows “DESCALING”.
The descaling liquid runs out of the hot water nozzle. The descaling
programme automatically goes through a serie of rinses and pauses
to remove limescale deposits from the inside of the coffee machine.
After about 30 minutes the water tank is empty and the top line of
the display alternates between “DESCALE COMPLETE” and “PLEASE
CONFIRM”.
7. Press the touch key ‘OK’ (9). The display shows “RINSING, FILL TANK”.
The appliance is now ready for a rinsing process with
clean water.
EN 22
SETTINGS
Setting the coffee temperature
You can choose between three temperature levels. The coffee
temperature levels are defined as follows:
• TEMPERATURE LOW
• TEMPERATURE MEDIUM
• TEMPERATURE HIGH
The factory setting is TEMPERATURE HIGH. You can change this as follows:
1. Press the touch key ‘MENU’ and press the scroll touch keys until the menu option
“TEMPERATURE” appears. Confirm the menu option with the touch key ‘OK’.
2. The display shows the current setting. Select another temperature with the scroll touch keys.
When the desired temperature is displayed, confirm it with the touch key ‘OK’.
Setting the switch-off time
The appliance is set by default to go off automatically 30 minutes after the last coffee has
been made. To change this interval (max. 120 min), proceed as follows:
• AUTO SHUTOFF TIME 1/2 hour
• AUTO SHUTOFF TIME 1 hour
• AUTO SHUTOFF TIME 2 hour
You can change this as follows:
1. Press the touch key ‘MENU’ and press the scroll touch keys until the menu option “AUTO
SHUTOFF TIME” appears. Confirm the menu option with the touch key ‘OK’.
2. Select another switch-off time with the scroll touch keys. When the desired switch-off
time is displayed, confirm it with the touch key ‘OK’.
Carrying out the descaling program
When the display shows “PLEASE DESCALE!”, the appliance must be descaled.
1. Insert the hot water nozzle.
2. Press the touch key ‘MENU’ and press the scroll touch keys until the
menu option “DESCALE” appears. Confirm the menu option with the
touch key ‘OK’.
3. The display shows ”PLEASE CONFIRM”. Confirm with the touch key
‘OK’. The descaling program starts.
The top line of the display alternates between “ADD DESCALER” and
“PLEASE CONFIRM”.
4. Empty the tank of water, pour the contents of the descaler pack into the tank respecting the
instructions given on the descaler pack, then add water. For subsequent descaling operations,
descaling solu tions can be purchased from authorised technical service centres.
Make sure that any splashes from the descaling product do not come into contact with
surfaces that are sensitive to acids, such as marble, limestone and ceramic.
EN 23
SETTINGS
5. Put a container with a capacity of at least 2 litres underneath the hot
water nozzle.
6. Press the touch key ‘OK’ (9). The display shows “DESCALING”.The
descaling liquid runs out of the hot water nozzle.
The descaling program automatically goes through a serie of rinses
and pauses to remove limescale deposits from the inside of the
coffee machine. After about 30 minutes the water tank is empty and
the top line of the display alternates between “DESCALE
COMPLETE” and “PLEASE CONFIRM”.
7. Press the touch key ‘OK’ (9). The display shows “RINSING, FILL
TANK”. The appliance is now ready for a rinsing process with clean
water.
8. Empty the container under the hot water nozzle and put it back
under the hot water nozzle.
9. T ake out the water tank and fill it with clean water.
10. Put the water tank back in place. The display shows: “PLEASE
CONFIRM”.
11. Press the touch key ‘OK’ (9). A rinsing process takes place with
clean water and the rinsing water runs out of the hot water nozzle.
After a few minutes the water tank is empty and the display shows
“PLEASE CONFIRM”.
12. Press the touch key ‘OK’ (9). The display shows “RINSING
COMPLETE CONFIRM”.
13. Press the touch key ‘OK’ (9). The display shows “DESCALE
COMPLETE” and then “FILL TANK!”
14. Take out the water tank, fill it with clean water and put it back in
place.
The appliance is now ready for use again and is back to the last
coffee mode selected.
5
2
7
9
Note: If the descaling cycle is interrupted before completion, the appliance continues to
display the descale message and the program must be started again from the beginning.
Failure to descale the appliance invalidates the guarantee.
UUSSEE OOUURR AARRTTWWOORRKK
MENU
EXIT
OK
5 7 9
2
CARRYING OUT THE DESCALING PROGRAMME
When the display shows “PLEASE DESCALE!”, the appliance must be descaled.