Instruction manual CM465 / CM465SS / CM465GM28 Please keep this instruction manual for future reference
STATISTICS
You can look up the following information values:
› Total number of coffees made with the appliance up to that point
› Number of descaling procedures carried out
› Number of cappuccinos made
› Numbers of litres of water
2 cups of coffee dispensed at the same time are counted as 2 cups.
Proceed as follows to look up the values:
1. Press the touch key ‘MENU’ and press the scroll touch keys until the menu option “STATISTICS”
appears. Confirm the menu option with the touch key ‘OK’.
2. The number of cups dispensed so far appears on the display, e.g. “TOT. COFFEES 135”.
3. Repeatedly press the scroll touch key to show the number of descaling procedures carried
out, e.g. “TOT. DESCALES 5”, “TOT. WATER” and then number of cappuccino’s, e.g. “TOT.
CAPPUCCINO 135”.
RESETTING THE APPLIANCE TO FACTORY SETTINGS
This function resets previously changed values to the factory settings. The following settings or
saved data are affected:
The factory default values can be reset as follows:
› Coffee, water and
cappuccino quantity
› Water hardness
› Coffee temperature
› Switch-off time
› Switch-on time
› Contrast
1. Press the touch key ‘MENU’ and press the scroll touch keys until the menu option “RESET TO
DEFAULT” appears. Confirm the menu option with the touch key ‘OK’.
2. The display shows “PLEASE CONFIRM”.
3. Confirm the menu option with the touch key ‘OK’.
To Next Page
Loading...
