Instruction manual DD810BK
21
Please keep this instruction manual for future reference
RESIDUAL HEAT DISPLAY:
The glass ceramic hob is equipped with a as a residual heat display.
As long as the H lights up after the cooking zone has been switched off, the residual heat can be
used for melting food or for keeping food warm.
The cooking zone may still be hot when the letter H no longer lights up.
There is a risk of burns.
The glass ceramic is not directly heated in the case of an induction cooking zone; it is only heated
up by heat reflected by the pan.
SETTING SUITABLE FOR
0 Off, using remaining heat
Keep-warm function
1-2 Simmering small portions
3 Simmering level
4-5
Simmering larger quantities or roasting larger pieces of meat until
they are cooked through
6 Roasting, getting juices
7-8 Roasting
9 Bringing to the boil, browning, roasting
P Power boost (highest power output)
POWER SETTINGS
The heating power of the cooking zones can be set at various power levels. In the chart you will
find examples of how to use each setting.
A higher power level may need to be selected for cooking pots without a lid.
To Next Page
Loading...
