EasyManua.ls Logo

Caple DD810BK - Page 39

Caple DD810BK
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instruction manual DD810BK
39
Please keep this instruction manual for future reference
TROUBLESHOOTING
Interference with and repairs to the appliance by unqualified persons are dangerous as they can
result in an electric shock or a short circuit. Do not interfere with or try to repair the appliance;
this could cause injury to persons and damage to the appliance. Always have such work done by a
Caple approved engineer or similar qualified persons.
PLEASE NOTE:
If your appliance is faulty, please check whether you can rectify the problem yourself by consulting
these instructions for use.
You may be able to rectify some problems yourself. They are described below.
THE FUSES BLOW REGULARLY?
Contact Caple Service or an electrician.
YOU CAN’T SWITCH YOUR INDUCTION HOB ON?
Has the wiring system (fuse box) in the house blown a fuse?
Has the hob been connected to the mains?
Are the sensor keys locked (childproof lock)?
Are the sensor keys partly covered by a damp cloth, fluid or a metallic object? Please rectify.
Are you using unsuitable cookware? See the section on “Cookware for induction hobs”
THE SYMBOL
WILL BLINK AND A TIME-LIMITED CONTINUOUS SIGNAL
WILL SOUND.
Food which has boiled over, cookware or other items are causing the touch control sensor keys to
be consistently operated.
Clean the surface or remove the item.
To delete the
symbol, press the same key or switch the hob off and on.

Related product manuals