What to do if my Caple Ventilation Hood lights and fan do not work?
If the lights and fan on your Caple Ventilation Hood aren't working, there are a couple of things you can check: * **Blown fuse:** Replace the fuse. * **Loose power cord:** Ensure the power cord is securely plugged into the power supply.
Why is my Caple Ventilation Hood extraction performance not good?
If your Caple Ventilation Hood isn't extracting air effectively, the filter may require cleaning. Clean the grease filter as directed in the ‘Care and maintenance’ section. Replace the charcoal filter if you are in recirculation mode.
What to do if my Caple FGC620 Ventilation Hood has serious vibration?
If your Caple Ventilation Hood is vibrating excessively, here are a few potential causes and solutions: 1. **Damaged fan blade or fan motor not fixed tightly:** Switch off the unit and contact Caple Service. This should be repaired by qualified service personnel only. 2. **Incorrectly hung unit:** Take down the unit and check whether the bracket is in the correct location.
General| Width | 60 cm |
|---|---|
| Extraction Rate | 610 m³/h |
| Noise Level | 67 dB |
| Number of Speeds | 3 |
| Lighting | 2 x 1.5W LED |
| Fluid dynamic efficiency class | A |
| Lighting efficiency class | A |
| Grease filtering efficiency class | C |
| Colour | Stainless Steel |
| Wall Mounted | Yes |
| Number of Motors | 1 |
| Material | Stainless Steel |
| Filter Type | Aluminum |
To Next Page
