24 Instruction manual RBF5 Please keep this instruction manual for future reference
CLEANING AND MAINTENANCE
Disconnect the unit from the power supply before cleaning.
Do not wash your appliance by pouring water on it.
Do not use abrasive products, detergents or soaps for cleaning the appliance. After
washing, rinse with clean water and dry carefully. When you have finished cleaning,
reconnect the plug to the mains supply with dry hands.
› Make sure that no water enters the lamp housing and other electrical components.
› The appliance should be cleaned regularly using a solution of bicarbonate of soda and
lukewarm water.
› Clean the accessories separately by hand with soap and water. Do not wash accessories in
a dishwasher.
› Clean the condenser with a brush at least twice a year. This will help you to save on energy
costs and increase productivity.
WARNING Serious injury or death risk
RISK OF ELECTRIC SHOCK Dangerous voltage risk
FIRE Warning; Risk of re / ammable materials
CAUTION Injury or property damage risk
IMPORTANT Operating the system correctly
Disconnect the unit from the power supply before cleaning.
Do not wash your appliance by pouring water on it.
Do not use abrasive products, detergents or soaps for cleaning the appliance. After
washing, rinse with clean water and dry carefully. When you have finished cleaning,
reconnect the plug to the mains supply with dry hands.
› Make sure that no water enters the lamp housing and other electrical components.
› The appliance should be cleaned regularly using a solution of bicarbonate of soda and
lukewarm water.
› Clean the accessories separately by hand with soap and water. Do not wash accessories in
a dish washer.
› Clean the condenser with a brush at least twice a year. This will help you to save on energy
costs and increase productivity.
WARNING Serious injury or death risk
RISK OF ELECTRIC SHOCK Dangerous voltage risk
FIRE Warning; Risk of re / ammable materials
CAUTION Injury or property damage risk
IMPORTANT Operating the system correctly
NOTE:
The power supply must be disconnected during cleaning.
NOTE:
The power supply must be disconnected during cleaning.
DEFROSTING THE FREEZER
Never use sharp metal tools, unless recommended by manufacturer, for this operation as they
can damage the refrigeration circuit.
After a period of time, frost will build up in certain areas in the freezer. The frost, accumulated
in the freezer, should be removed periodically (use the plastic scraper).
Complete defrosting will become necessary if the frost layer exceeds 3-5 mm to maintain the
efficiency of the freezer.
› The day before you defrost, set the thermostat dial to position “5” to freeze the foods
completely. (Recommendation).
› During defrosting, frozen foods should be wrapped in several layers of paper and kept in a
cool place. The inevitable rise in temperature will shorten their storage life. Remember to
use these foods within a relatively short period of time.
WARNING Serious injury or death risk
RISK OF ELECTRIC SHOCK Dangerous voltage risk
FIRE Warning; Risk of re / ammable materials
CAUTION Injury or property damage risk
IMPORTANT Operating the system correctly
Disconnect the unit from the power supply before cleaning.
Do not wash your appliance by pouring water on it.
Do not use abrasive products, detergents or soaps for cleaning the appliance. After
washing, rinse with clean water and dry carefully. When you have finished cleaning,
reconnect the plug to the mains supply with dry hands.
› Make sure that no water enters the lamp housing and other electrical components.
› The appliance should be cleaned regularly using a solution of bicarbonate of soda and
lukewarm water.
› Clean the accessories separately by hand with soap and water. Do not wash accessories in
a dish washer.
› Clean the condenser with a brush at least twice a year. This will help you to save on energy
costs and increase productivity.
WARNING Serious injury or death risk
RISK OF ELECTRIC SHOCK Dangerous voltage risk
FIRE Warning; Risk of re / ammable materials
CAUTION Injury or property damage risk
IMPORTANT Operating the system correctly
NOTE:
The power supply must be disconnected during cleaning.
To Next Page
Loading...
