19Instruction manual RiL892Please keep this instruction manual for future reference
› Apply the foot blanking covers by clipping them in to place on the feet at the bottom of
the appliance. The plastic stem on the foot caps are there as a guide of what the distance
between the product and the edge of the cabinet should be (approximately 42mm). Snap
off the plastic stem after installation.
opriate height, hold the bottom of the balcony
> Apply the foot blanking covers by clipping them in to place on the feet at the bottom of the
appliance. The plastic stem on the foot caps are there as a guide of what the distance between
the product and the edge of the cabinet should be (approximately 42mm). Snap off the plastic
stem after installation.
> Apply blanking covers by clipping them in to place at the top metal plinth at the top
of the appliance.
To Next Page
Loading...
