30 Instruction manual RiL892 Please keep this instruction manual for future reference
TROUBLESHOOTING
BEFORE CALLING FOR SERVICE
Reviewing the information below may save you from calling for service.
THE APPLIANCE DOES NOT OPERATE CHECK IF:
› There is power to the unit
› The general switch in your home is connected
› The socket is working. To check this, plug in another appliance that you know is working
into the same socket.
› The fuse has not blown
› The voltage is correct for the appliance
THE APPLIANCE PERFORMS POORLY CHECK IF:
› You have not overloaded the appliance
› The fridge temperature set to MAX
› The door is closed perfectly
› There is no dust on the condenser
› There is enough space at the rear and side walls for ventilation
THE INTERNAL TEMPERATURE OF THE APPLIANCE IS TOO COLD:
Increase the temperature by adjusting the thermostat to a lower setting. The highest setting
should only be used as a rapid cool and only set 2 hours before a large amount of food is
placed in the fridge. Otherwise the temperature of the fridge could fall bellow 0°C as the
compressor will run continuously.
To Next Page
Loading...
