Caple RiR125 - Page 19

19Instruction manual RiR125Please keep this instruction manual for future reference
› Apply blanking covers by clipping them in to place at the top metal plinth at the top of
the appliance.
› Apply the foot blanking covers by clipping them in to place on the feet at the bottom of
the appliance. The plastic stem on the foot caps are there as a guide of what the distance
between the product and the edge of the cabinet should be (approximately 42mm). Snap
off the plastic stem after installation.
> Apply the foot blanking covers by clipping them in to place on the feet at the bottom of the
appliance. The plastic stem on the foot caps are there as a guide of what the distance between
the product and the edge of the cabinet should be (approximately 42mm). Snap off the plastic
stem after installation.
> Apply blanking covers by clipping them in to place at the top metal plinth at the top
of the appliance.
opriate height, hold the bottom of the balcony
> Apply the foot blanking covers by clipping them in to place on the feet at the bottom of the
appliance. The plastic stem on the foot caps are there as a guide of what the distance between
the product and the edge of the cabinet should be (approximately 42mm). Snap off the plastic
stem after installation.
> Apply blanking covers by clipping them in to place at the top metal plinth at the top
of the appliance.