Caple RiR125 - Transport and Repositioning

29Instruction manual RiR125Please keep this instruction manual for future reference
G
1
2
3
4
5
1.Remove the screw on the light cover by screw driver. (Fig.1)
2.Press the hooks on light cover. (Fig.2)
3.Open the light cover towards arrow when top hooks pull out from housing. (Fig.3)
4.Pull out the cover towards arrow remove it. (Fig.4)
5.Turn the light bulb counter clockwise and remove it. (Fig.5)
6.Change the present light bulb with a new one of not more than 15W. (Fig.5)
7.Implement the steps in reverse order.
8.After waiting 5 minutes, plug the unit.
Unplug the unit from the power supply before starting the process.
LIGHT SOURCE ENERGY CLASS
This product containsalightsourceofenergy efficiency class F.
1
2
3
4
5
1.Remove the screw on the light cover by screw driver. (Fig.1)
2.Press the hooks on light cover. (Fig.2)
3.Open the light cover towards arrow when top hooks pull out from housing. (Fig.3)
4.Pull out the cover towards arrow remove it. (Fig.4)
5.Turn the light bulb counter clockwise and remove it. (Fig.5)
6.Change the present light bulb with a new one of not more than 15W. (Fig.5)
7.Implement the steps in reverse order.
8.After waiting 5 minutes, plug the unit.
Unplug the unit from the power supply before starting the process.
LIGHT SOURCE ENERGY CLASS
This product containsalightsourceofenergy efficiency class F.
1
2
3
4
5
1.Remove the screw on the light cover by screw driver. (Fig.1)
2.Press the hooks on light cover. (Fig.2)
3.Open the light cover towards arrow when top hooks pull out from housing. (Fig.3)
4.Pull out the cover towards arrow remove it. (Fig.4)
5.Turn the light bulb counter clockwise and remove it. (Fig.5)
6.Change the present light bulb with a new one of not more than 15W. (Fig.5)
7.Implement the steps in reverse order.
8.After waiting 5 minutes, plug the unit.
Unplug the unit from the power supply before starting the process.
LIGHT SOURCE ENERGY CLASS
This product containsalightsourceofenergy efficiency class F.
TRANSPORT AND REPOSITIONING
TRANSPORTATION AND CHANGING POSITIONING
- The original packaging and foam may be kept for re-transportation (optional).
- Fasten your appliance with thick packaging, bands or strong cords and follow the instructions
for transportation on the packaging.
-Removeallmovableparts(shelves,accessories,vegetablebins,andsoon)orxthemintothe
appliance against shocks using bands/tape when re-positioning or transporting. Always carry
your appliance in the upright position.