What to do if the Caple TSCH601 lights and fan do not work?
If the lights and fan on your Caple Ventilation Hood aren't working, it could be due to a blown fuse. In this case, replace the fuse. Another possible cause is a loose power cord, so ensure that the power cord is properly plugged into the power supply.
Why is my Caple Ventilation Hood extraction performance not good?
Poor extraction performance in your Caple Ventilation Hood is often due to a filter that requires cleaning. Clean the grease filter as directed in the ‘Care and maintenance’ section. If your hood is in recirculation mode, consider replacing the charcoal filter.
Why is my Caple TSCH601 Ventilation Hood vibrating so much?
Serious vibration in your Caple Ventilation Hood could be due to several reasons: * A damaged fan blade. * The fan motor not being fixed tightly. * The unit not being correctly hung on the bracket. In the case of fan blade or motor issues, switch off the unit and contact Caple Service. If the unit isn't hung correctly, take down the unit and check the bracket's location.
How to fix a Caple Ventilation Hood when the light is on but the fan is not working?
If the lights are on but the fan isn't working on your Caple Ventilation Hood, it could be because the fan blade is jammed or the motor is damaged. Switch off the unit and contact Caple Service. This should be repaired by qualified service personnel only.
What to do if the lights and fan on my Caple TSCH601 Ventilation Hood do not work?
If the lights and fan on your Caple Ventilation Hood aren't working, there are a couple of things to check: * **Blown Fuse:** Replace the fuse. * **Loose Power Cord:** Ensure the power cord is securely plugged into the power supply.
Why is the extraction performance of my Caple TSCH601 Ventilation Hood not good?
Poor extraction performance in your Caple Ventilation Hood is often due to a dirty filter. Clean the grease filter as instructed in the ‘Care and maintenance’ section. If you're using recirculation mode, replace the charcoal filter.
What to do if my Caple TSCH601 Ventilation Hood is vibrating seriously?
If your Caple Ventilation Hood is vibrating significantly, the following could be the cause: 1. **Damaged Fan Blade:** Switch off the unit and contact Caple Service. To be repaired by qualified service personnel only. 2. **Loose Fan Motor:** Switch off the unit and contact Caple Service. To be repaired by qualified service personnel only. 3. **Incorrect Bracket Mounting:** Take down the unit and check whether the bracket is in the correct location.
How to fix a Caple Ventilation Hood when the lights are on but the fan doesn't work?
If the lights are on but the fan isn't working on your Caple Ventilation Hood, it might be because the fan blade is jammed. Switch off the unit and contact Caple Service. To be repaired by qualified service personnel only.
General| Model | TSCH601 |
|---|---|
| Type | Chimney Hood |
| Width | 60 cm |
| Noise Level | 65 dB |
| Number of Speeds | 3 |
| Lighting | LED |
| Number of Motors | 1 |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Material | Stainless Steel |
| Installation Type | Wall-mounted |
| Filter Type | Aluminium Grease Filter |
To Next Page
