Caple TSCH601 - Page 18

Instruction manual TSCH601 & TSCH90118
Please keep this instruction manual for future reference
7
 
 
 
   
1. Switch off and unplug the extractor
2. Remove the aluminium grease filter
3. Remove the LED light by squeezing the metal clips
4. Remove the clip cover by removing the lid (see
image a.)
5. Unclip the light fixing (b.) and remove
6. Replace the light with the same rated LED fitting
by following these instructions in reverse.
a
.
b.
REPLACING THE BULB
NOTE:
The lights must be replaced by a qualified person.
1. Switch off and unplug the extractor.
2. Remove the aluminium grease filter.
3. Remove the LED light by squeezing the metal clips.
4. Remove the clip cover by removing the lid
(see image a.).
5. Unclip the light fixing (b.) and remove.
6. Replace the light with the same rated LED fitting by following these instructions in reverse.
LIGHT SOURCE ENERGY CLASS
This product contains a light source of energy efficiency class G.